
DuraFloor
Concrete floors coloured and strengthened from within, not coated over.
Polished Concrete, Coloured Through
Colouring a concrete floor was long considered impractical. DuraFloor, developed by Woori Industrial Development Co., Ltd. in Korea, injects a water-soluble colour dye into the concrete itself and polishes it to a finish that reads like marble. The application is non-toxic and odourless.
The difference from epoxy and urethane is what happens over time. Those are coatings: they sit on the surface, and they peel, delaminate and need redoing every couple of years. DuraFloor penetrates and reinforces the slab, so the colour is part of the floor rather than a layer on top of it.
CCI Global Trade Corporation is an authorised dealer. Tell us the area, the use and the colour you have in mind and we will come back with a proposal.
Technical Data
Figures published by the manufacturer, compared against epoxy.
| Property | DuraFloor |
|---|---|
| System | Water-soluble colour injected into the concrete, then polished |
| Manufacturer | Woori Industrial Development Co., Ltd. (Korea) |
| Products | WINGSCHEM NSD-1110 (oil-based), NAD-1110 (water-based) |
| Key components | Water-soluble dyes, additives, reinforcing agents |
| Container | 18 kg |
| Colour | Manufactured to order |
| Application | Indoor concrete floors |
| Eco-friendliness (HCHO) | 0.001 mg/m²h |
| Incombustibility | 100% incombustible — produces no toxic gases in a fire |
| Compression strength | 600 kgf/cm² (epoxy 400) |
| Wear resistance | 0.02 (epoxy 0.2) |
| Adhesion strength | 1000 psi (epoxy 134) |
| Friction coefficient | 200% of the epoxy standard |
| Service life | Semi-permanent (epoxy approx. 2 years) |
| Application rate | Approx. 5 days per 1,000 m² |
The figures above are the manufacturer's published test data, shown against epoxy for comparison. Results on any given floor depend on the condition of the substrate and the conditions during application, so a site assessment comes before a firm proposal.
Get a quote for this product
Tell us the quantity and destination port. We reply with availability and terms.
Where It Is Used
Indoor concrete floors that have to last and stay safe.
Industrial and Warehouse Floors
Anti-slip even where water is present, no tyre squeal from turning forklifts, and incombustible — the three things that matter on a working floor.
Commercial and Public Spaces
A translucent, marble-like finish in a colour made to order, without the plastic look of a coated floor.
Hygiene-Sensitive Facilities
Non-toxic and odourless to apply, so a space can be brought back into use quickly, and no toxic gases are produced in a fire.
Supply and Application
As an authorised dealer we handle supply and coordinate application. Colour is manufactured to order, so the shade is agreed before material is produced.
Scheduling is planned against the area: the manufacturer puts application at roughly five days per 1,000 m², a day longer than epoxy, which is the trade-off for a floor that is not redone every two years.
Site Assessment
The condition of the existing slab decides what is achievable; this is agreed before a firm proposal.
Colour to Order
The shade is manufactured for the job rather than picked from stock.
Scheduled Application
Work is planned around the area and the time the space can be taken out of use.
Why Not Simply Epoxy
Epoxy, urethane and ordinary coatings sit on top of the slab. They show their age as peeling, delamination and swelling, and they are redone every couple of years — each time producing industrial waste.
DuraFloor is injected rather than coated, which is why the manufacturer rates it semi-permanent from a single application. The construction process is non-toxic and odourless, and the cured floor is rated 100% incombustible.
Frequently Asked Questions
What buyers ask before specifying it.
How is this different from an epoxy floor?
Epoxy is a coating on top of the concrete; it peels and delaminates and is typically redone every two years. DuraFloor is a dye injected into the concrete and polished, so the colour and the reinforcement are in the slab itself. The manufacturer rates it semi-permanent from one application.
Can it be used outdoors?
It is specified for indoor concrete floors. Tell us about the space and we will confirm whether it suits.
Which colours are available?
Colour is manufactured to order rather than chosen from a fixed range, and the finish is translucent — closer to watercolour than to the flat, masked look of a coated floor.
How do I request a quotation?
Send us the floor area, what the space is used for and the colour you have in mind, through the contact form, by email or on WhatsApp. A site assessment comes before a firm figure.
Request a Proposal
Send the area, the use and the colour you have in mind. Our team responds with the next step.
Request a quote